SPL Tube Vitalizer - Program Equalizer. Patented. Legendary
SPL Tube Vitalizer - Program Equalizer. Patented. Legendary
₹207,945

  • SPL Tube Vitalizer - Program Equalizer. Patented. Legendary

  • SPL Tube Vitalizer - Program Equalizer. Patented. Legendary

SPL Tube Vitalizer - Program Equalizer. Patented. Legendary
SPL Electronics

SPL Tube Vitalizer - Program Equalizer. Patented. Legendary

   0 reviews
Product Code:
Availability:
SPL Tube Vitalizer
Call for Availability
₹207,945

Call 044-2819 3607 for availability

Analog input & output; XLR (balanced)
Maximum input & output level
32.5 dBu
Input impedance
10 kΩ
Output impedance
75 Ω
Frequency range (-3dB)
20 Hz – 100 kHz
THD + N (10 Hz – 22 kHz, 32 dB Gain)
0.002 %
THD + N (10 Hz – 22 kHz, 63 dB Gain)
0.001 %
Noise (A-weighted, 150 Ω, 32 dB Gain)
- 94 dBu
Noise (A-weighted, 150 Ω, 63 dB Gain)
- 67.5 dBu
E.I.N. (150 Ω)
-130.5 dBu
Common mode rejection (1 kHz)
88 dB

Internal Linear Power Supply with Shielded Toroidal Transformer
Operating voltage for audio electronics
+/- 60 V
Operating voltage for relays and LEDs
+ 12 V

Mains Power Supply
Mains voltage (selectable, see fuse chamber)
230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V
T 1 A
Fuse for 115 V
T 2 A
Power consumption
max. 20 VA

Dimensions & Weight
W x H x D (width x height x depth)
482 x 88 x 300 mm
19 x 3.46 x 11.8 inch
Unit weight
6.1 kg
13.45 lbs
Shipping weight (incl. packaging)
7.5 kg
16.54 lbs
The Vitalizer is based on findings of psychoacoustics and audiometry. 
Its filter network is one of the few patented filters.
It makes the richness of detail of audio signals more audible. Interventions in the sound image are more of a musical nature. Music productions sound more natural, lively, differentiated, easier to understand, more deeply layered and more widely spread apart.


These are the five controls of the Vitalizer core circuit.
Drive controls the level going into the filter network. The bass emphasizes a soft or hard tone. The coil filter (LC) makes the bass more pithy and the compressor catches level peaks.
Mid-Hi Tune sets the frequency of operation above which frequencies are boosted and below which frequencies are cut.
Process Level adjusts the intensity of Mid-Hi Tune and bass.


In addition to the Vitalizer core circuit, the Tube Vitalizer has a high frequency and harmonics processing stage with Frequency and Intensity controls and switchable coil filter (LC) as well as compressor.



The switchable tube stage is constructed with three tubes: first, left and right  pass through their channel output tube, then the channels pass jointly through the third tube as a stereo signal.
As a little treat, the Tube Vitalizer offers a shunt limiter. This limits the level according to a characteristic curve tuned to the tubes and provides the signal with a sonic effect similar to the saturation effect of analog tape machines.

The De-Masking
A key feature of the Vitalizer is the unmasking of superimposed sound components. The Vitalizer thereby relates the time of perception of a frequency to its amplitude. Through a minimal temporal offset of loud frequencies, quieter, previously superimposed sound components are “de-masked” and thus become audible.

The Adaptation to Curves of Equal Loudness
The non-linear sensitivity of the human hearing is described already in the 1930s by the “Fletcher-Munson curves”.
These “curves of equal loudness” (today defined by the standard ISO 226:2003) illustrate the equal perception of  loudness as a measure of sound pressure level, over the frequency spectrum, for which a listener perceives a constant loudness when presented with pure steady tones.
The Vitalizer adapts the frequency spectrum to the curves of equal loudness, which improves the loudness perception in particular.

Reviews (0)

   0 reviews
Write a review